Configuring A Cisco 2600 Series Router as a Terminal Server

Configures the use of a NM-16A card in a cisco 2600 router as a terminal server.

February 16, 2012

interface Loopback0
   ip address %{loopback_ip}%
   no ip redirects

ip host %{Device_name_on_port_33}% 2033 %{loopback_ip}%
ip host %{Device_name_on_port_34}% 2034 %{loopback_ip}%

line 33 48
   exec-timeout 0 0
   no flush-at-activation
   logging synchronous
   no exec
   transport preferred telnet
   transport input all
   stopbits 1
   flowcontrol hardware