Templates Tagged "router"

template icon

Fetch ipsec Tunnel in/out octets with SNMP

February 16, 2012Simple bash script to retrieve ingress and egress traffic statistics for an ipsec tunnel.
template icon

Enable netflow and export on a router

February 16, 2012Enables netflow monitoring on the %[interface_to_monitor]% interface and configures netflow exporting to a %[destination_ip]% and %[destination_port]%
template icon

Ipsec l2l tunnel between two routers

February 16, 2012Build an ipsec tunnel between Router A and Router B.
template icon

Configuring A Cisco 2600 Series Router as a Terminal Server

February 16, 2012Configures the use of a NM-16A card in a cisco 2600 router as a terminal server.
template icon

Cisco IOS Basics

July 9, 2012IPv4 only, no IPv6 options, see other template. Uses case insensitive local AAA only with enable secret and a local user. SSH and line timeouts are set to 15 minutes for PCI-DSS compliance requirement. FTP crashdump destination configured, remove if you don't want it. Bear in mind this disables the AUX port on routers, it isn't there on most switches, ...
template icon

Cisco IOS Router Template

July 18, 2014Basic IOS router template with EIGRP. OSPF/ISIS/iBGP/eBGP to be added later.
template icon

Team CYMRU Secure IOS Template

August 14, 2014Refer to the following location: https://www.cymru.com/Documents/secure-ios-template.html Still undergoing edit'ing to create all of the template variables.
template icon

Create BVIs "VLANS" on IOS xR

September 25, 2014This is how you would create a VLAN trunk over a port-channel in Cisco IOS XR.